Search

Mulch film has provided significant convenience for agricultural development. However, its stable physical and chemical properties make it challenging to manage under natural conditions, potentially posing a serious environmental threat if mishandled. This study investigates the influence of various experimental factors on the degradation of agricultural film using low-temperature plasma degradation technology. A self-made needle-plate electrode structure was employed to treat polyethylene film with a high-frequency AC voltage. The study analyzesd the effects of input power, discharge time, electrode number, and air circulation on mulch film degradation. Changes in mulch quality, Raman spectrum, scanning electron microscope observations, and relative molecular mass were compared before and after treatment. The results revealed a 2.6-fold increase in mulch film degradation efficiency when the input power rised from 26 W to 80 W. While increasing input power enhanced high-energy electrons and active substances in the reaction space, energy efficiency did not proportionally increase with the degradation rate. At 51 W input power, the energy efficiency reached a maximum of 58.82 μg/(W·h). The number of needle tips influences plasma uniformity and input power, impacting film degradation efficiency. As the number of needle electrodes increases, film degradation efficiency initially decreased from 3.49% to 2.1%, then rised to 3.57%. Prolonged discharge time made the molecular chain structure more vulnerable to plasma attack and breakage. Additionally, air fluidity affects ozone concentration in the reactor, with higher concentrations in a closed environment at low input power. Increasing the input power to 80 W results in higher ozone concentration with good air fluidity, aiding in improving mulch film degradation efficiency.

Flashover characteristics are closely related to the electrical field distribution on the surface of oil-paper insulation. In this study, the effects of electrical field and DC voltage components on the creepage flashover characteristics of oil-paper insulation under combined AC-DC voltage (CADV) are investigated using two electrode models. The results demonstrate that when the DC voltage component is large, the flashover voltage under the influence of strong parallel electric field component is approximately 1.2 times higher than that under the influence of strong normal electric field component. When the DC voltage component value increases under the influence of strong normal electric field component, the value of corresponding AC voltage component of the creepage flashover voltage exhibits a decreasing trend. It is believed that due to the strong normal electric field component, the electrons intensify the collision on the surface of the insulating pressboard. Under the influence of the DC voltage component and due to the presence of space charge on the insulating pressboard, the distribution shape of carbonized particles on the surface of the insulating pressboard after creepage flashover is different. Furthermore, the instantaneous energy release during creepage flashover under CADV is higher than that under AC voltage, and the greater the DC voltage component value, more severe is the damage to the fibers on the insulating pressboard surface.

There is a relative lack of research on the development of creepage discharge in aged oil-paper insulation subjected to AC-DC combined voltage in converter transformers. In this study, based on the physical and chemical properties of oil-paper, we propose a sphere-plate electrode model to study the creepage discharge parameters and characteristic spectra of aged oil-paper subjected to AC-DC combined voltage. The results show that the creepage discharge inception voltage of aged oil-paper is related to the AC voltage component of the AC-DC combined voltage. However, when the DC voltage component is 60 kV, the flashover phenomenon was found to occur in one of the severely aged samples before the AC voltage was applied. Despite being subjected to the same DC voltage, the flashover phenomenon did not occur in three other samples aged to different degrees. Large-amplitude discharges were found to appear earlier in the severely aged samples. At the same creepage discharge stage, as the aging time of the oil-paper increased, the number of large-amplitude discharges was found to rapidly increase, and the time interval between adjacent discharges was found to gradually decrease. At each stage of the creepage discharge, the small-amplitude discharge has a “hump” shaped distribution. The larger the DC voltage component, the shorter the endurance time of aged oil-paper, and the more severe the damage to the oil-paper. The DC voltage component was found to have an accelerating effect on the development of creepage discharge in aged oil-paper insulation.